Difficulty
Easy
Steps
5
Time Required
4 - 8 minutes
Sections
2
- Battery
- 2 steps
- Camera
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackHTC Touch Pro 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the back cover by applying pressure and sliding upward.
- Lift the back cover up and away from the phone.
Remove the back cover by applying pressure and sliding upward.
Lift the back cover up and away from the phone.
1024
Step 2
- Remove the battery by lifting upward from the slot located on the right hand side.
Remove the battery by lifting upward from the slot located on the right hand side.
Step 3
Camera
- Remove the four screws from the corners of the phone using a T5 Torx screwdriver.
Remove the four screws from the corners of the phone using a T5 Torx screwdriver.
Step 4
- Lift the top segment of the phone frame off.
- Be cautious with the ribbon on the back of this part.
Lift the top segment of the phone frame off.
Be cautious with the ribbon on the back of this part.
Step 5
- Use the tweezers to pull the camera cover up and away from the phone. Repeat for the camera underneath.
Use the tweezers to pull the camera cover up and away from the phone. Repeat for the camera underneath.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 8 other contributors
Melinda Phan
Member since: 04/17/2011
435 Reputation
9 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 9-64, Walters Spring 2011
Member of Cal Poly, Team 9-64, Walters Spring 2011
CPSU-WALTERS-S11S9G64
5 Members
18 Guides authored
