Difficulty
Easy
Steps
5
Time Required
Suggest a time??
Sections
3
- Rear Panel
- 2 steps
- Battery
- 1 step
- MicroSD Card
- 2 steps
Flags
0
BackHTC Thunderbolt
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Panel
- Insert the plastic opening tool into the top of the Thunderbolt near the power button.
- Gently pry up on the rear panel around the edges until it is loose.
Insert the plastic opening tool into the top of the Thunderbolt near the power button.
Gently pry up on the rear panel around the edges until it is loose.
1024
Step 2
- Lift and remove the rear panel.
Lift and remove the rear panel.
Step 3
Battery
- Using the plastic opening tool, lift up the battery from the bottom near the kickstand.
- Remove the battery from the inner frame.
Using the plastic opening tool, lift up the battery from the bottom near the kickstand.
Remove the battery from the inner frame.
Step 4
MicroSD Card
- Use your finger to push the MicroSD card in towards the top of the phone, allowing it to be released from the casing.
Use your finger to push the MicroSD card in towards the top of the phone, allowing it to be released from the casing.
Step 5
- Use tweezers to grab onto the MicroSD card and carefully remove it from the casing.
Use tweezers to grab onto the MicroSD card and carefully remove it from the casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Vanessa
Member since: 01/18/2013
60 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 19-45, Regan Winter 2013
Member of Cal Poly, Team 19-45, Regan Winter 2013
CPSU-REGAN-W13S19G45
4 Members
24 Guides authored
