Htc Sensation 4G Pyramid Touch Screen Digitizer Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          25 - 35 minutes            

Sections

1

• Touch Screen / Digitizer
• 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHTC Sensation

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

How to disassemble / make apart and change broken or not working touch screen. Video tutorial:

Please SUBSCRIBE to my channel ツ

What you need

Video Overview

Step 1

              Touch Screen / Digitizer               

• Unscrew 8x screws and remove the back cover using a plastic tool.

Unscrew 8x screws and remove the back cover using a plastic tool.

1024

Step 2

• Disconnect the LCD display cable and the menu buttons cable.
• There are another two cable connector between the main board and the additional upper board.

Disconnect the LCD display cable and the menu buttons cable.

There are another two cable connector between the main board and the additional upper board.

Step 3

• In case to remove the upper board, unscrew the screw and release the power button flex cable and the volume up/down flex cable.
• In another side of the board is the touchscreen flex cable connector.

In case to remove the upper board, unscrew the screw and release the power button flex cable and the volume up/down flex cable.

In another side of the board is the touchscreen flex cable connector.

Step 4

• Use hot air to warm the touchscreen.
• With a plastic tool start to separate the touchscreen.
• Gently release the menu flex cable from the touch screen.

Use hot air to warm the touchscreen.

With a plastic tool start to separate the touchscreen.

Gently release the menu flex cable from the touch screen.

Step 5

• The touchscreen flex cable go between the LCD display and the upper case / housing.
• Again use a plastic tool and hot air to free up the cable.
• Work carefully to avoid breaking the display.

The touchscreen flex cable go between the LCD display and the upper case / housing.

Again use a plastic tool and hot air to free up the cable.

Work carefully to avoid breaking the display.

Step 6

• I use toothpicks and hot air to make place for the cable of the new spare part.

I use toothpicks and hot air to make place for the cable of the new spare part.

Step 7

• It’s time to assemble the phone.
• .
• Please SUBSCRIBE to my channel ツ

It’s time to assemble the phone.

.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    ZFix                     

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored