Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes

Sections

1

  • Touch Digitizer
  • 6 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHTC Radar 4G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If your phone isn’t properly registering your touch, you might need to replace the touch digitizer, which turns your finger actions into digital actions.

What you need

Step 1

              Touch Digitizer
  • Slide the lower plastic panel off of the phone.
  • Remove the four screws from the white plastic cover of the phone using the T5 Torx screwdriver.
  • Remove the two black screws from the silver frame.

Slide the lower plastic panel off of the phone.

Remove the four screws from the white plastic cover of the phone using the T5 Torx screwdriver.

Remove the two black screws from the silver frame.

1024

Step 2

  • Remove the back cover by pressing on the back of the motherboard lightly and pulling the screen out carefully.

Remove the back cover by pressing on the back of the motherboard lightly and pulling the screen out carefully.

Step 3

  • Remove the battery from the phone using the T5 Torx screwdriver.

Remove the battery from the phone using the T5 Torx screwdriver.

Step 4

  • Remove the three screws using a screwdriver.
  • Remove the plastic frame.

Remove the three screws using a screwdriver.

Remove the plastic frame.

Step 5

  • Remove the upper board and motherboard from the phone using an opening tool.
  • The regular black nylon spudger should be used whenever possible, especially around motherboards.

Remove the upper board and motherboard from the phone using an opening tool.

The regular black nylon spudger should be used whenever possible, especially around motherboards.

Step 6

  • Use your hands to remove the touch digitizer.

Use your hands to remove the touch digitizer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors 


                    Kevin Guerra

Member since: 10/10/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Texas Tech, Team 12-5, Bennett Fall 2016                        

                                                  Member of Texas Tech, Team 12-5, Bennett Fall 2016 



                    TTU-BENNETT-F16S12G5                     


                                            4 Members                     


                                            2 Guides authored