Difficulty
Moderate
Steps
5
Time Required
3 - 5 minutes
Sections
3
- Rear Battery Cover
- 2 steps
- Battery
- 1 step
- Frame
- 2 steps
Flags
0
BackHTC Ozone
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Battery Cover
- Flip the phone over to have the rear cover facing up.
- The camera lens should be towards the top of the phone.
Flip the phone over to have the rear cover facing up.
The camera lens should be towards the top of the phone.
1024
Step 2
- Slide the cover up, towards the top of phone, to unlock the battery cover.
- Lift the cover off phone and remove it.
Slide the cover up, towards the top of phone, to unlock the battery cover.
Lift the cover off phone and remove it.
Step 3
Battery
- Use your finger to push the top of the battery downwards and lift the battery out of the phone.
Use your finger to push the top of the battery downwards and lift the battery out of the phone.
Step 4
Frame
- Remove the six Torx #5 screws that are securing the rear frame.
Remove the six Torx #5 screws that are securing the rear frame.
Step 5
- Pry the frame open, releasing the eight plastic tabs around the edge of the frame, using the plastic opening tool.
- A plastic card can be used instead of the plastic opening tool.
Pry the frame open, releasing the eight plastic tabs around the edge of the frame, using the plastic opening tool.
A plastic card can be used instead of the plastic opening tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 7 other contributors
Marco Jokada
Member since: 04/28/2011
247 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
CSU Los Angeles, Team 1-2, Nelson Spring 2011
Member of CSU Los Angeles, Team 1-2, Nelson Spring 2011
CSULA-NELSON-S11S1G2
5 Members
12 Guides authored