Htc Opm9200 Lower Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          35 minutes            

Sections

2

• Backplate Removal Prereq
• 4 steps
• Lower Speaker
• 1 step

Flags

0

• BackHTC OPM9200

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Backplate Removal Prereq               

• Before you proceed, discharge your device battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
• Power off the device.
• Locate the SD Card/SIM Card cover flap on the left side of the device.
• Upon opening the cover flap you will find slots for SD Card and the SIM Card. Carefully remove these items if your device has them and set them aside.
• Lift on the back cover to begin the removal process. Continue removing the back cover by working along the edge. Once removed set aside the back cover.

Before you proceed, discharge your device battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

Power off the device.

Locate the SD Card/SIM Card cover flap on the left side of the device.

Upon opening the cover flap you will find slots for SD Card and the SIM Card. Carefully remove these items if your device has them and set them aside.

Lift on the back cover to begin the removal process. Continue removing the back cover by working along the edge. Once removed set aside the back cover.

1024

Step 2

• Remove the five 3.5mm T4 Torx Screws.
• Remove the two 4.5mm #00 Phillips screws.
• Please be aware of the sticker below the battery. Following this guide past this point may void your device’s warranty.

Remove the five 3.5mm T4 Torx Screws.

Remove the two 4.5mm #00 Phillips screws.

Please be aware of the sticker below the battery. Following this guide past this point may void your device’s warranty.

Step 3

• Place a plastic opening tool along the seam of the front plate and back plate. Run the opening tool along the seam while prying slightly in order to pop the plastic clips away from the front plate.
• Once one or two clips have popped away you may begin to use your free hand to apply additional pressure while continuing to apply prying pressure as well with the opening tool.
• Apply constant but controlled pressure while separating the front from the back. Damage may occur if using excessive pressure while separating the plates along the seam.

Place a plastic opening tool along the seam of the front plate and back plate. Run the opening tool along the seam while prying slightly in order to pop the plastic clips away from the front plate.

Once one or two clips have popped away you may begin to use your free hand to apply additional pressure while continuing to apply prying pressure as well with the opening tool.

Apply constant but controlled pressure while separating the front from the back. Damage may occur if using excessive pressure while separating the plates along the seam.

Step 4

• Continue working your way around the seam between the two parts and eventually you will be able to separate the entirety of the backplate revealing the internals of the device.

Continue working your way around the seam between the two parts and eventually you will be able to separate the entirety of the backplate revealing the internals of the device.

Step 5

              Lower Speaker               

• Place the plastic opening tool under the speaker and pry it away from the device.

Place the plastic opening tool under the speaker and pry it away from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Steve Gilland                     

Member since: 01/18/2017

1,019 Reputation

                                      10 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Arkansas State University, Team 1-3, Chamberlain Spring 2017                        

                                                  Member of Arkansas State University, Team 1-3, Chamberlain Spring 2017 



                    ARSU-CHAMBERLAIN-S17S1G3                     


                                            3 Members                     


                                            20 Guides authored