Difficulty
Difficult
Steps
7
Time Required
1 hour
Sections
1
- Top Speaker
- 7 steps
Flags
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
BackHTC One X+
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Top Speaker
- Hold down the power button to turn off your device.
- Insert a pin, paper clip, or another similar object into the hole next to the micro sim card holder to remove it.
- The SIM card slot is located on the top edge of the device.
Hold down the power button to turn off your device.
Insert a pin, paper clip, or another similar object into the hole next to the micro sim card holder to remove it.
The SIM card slot is located on the top edge of the device.
1024
Step 2
- Using plastic opening tools, pry open the bottom of the device.
- You will hear clicking sounds as the sides of the device detach from the screen.
- Once both sides are detached use the suction cup tool to remove the screen completely from the black casing.
Using plastic opening tools, pry open the bottom of the device.
You will hear clicking sounds as the sides of the device detach from the screen.
Once both sides are detached use the suction cup tool to remove the screen completely from the black casing.
Step 3
- Remove the five 2.4mm screws located around the camera using a Philips head screwdriver to remove the plastic cover.
- Once you have disassembled your device the warranty will no longer be valid.
Remove the five 2.4mm screws located around the camera using a Philips head screwdriver to remove the plastic cover.
Once you have disassembled your device the warranty will no longer be valid.
Step 4
- Use the J000 Philips screwdriver to remove the screws and remove the PCB board and antenna.
- These are two 3.4mm Philips head screws found in the lower right corner of the phone.
Use the J000 Philips screwdriver to remove the screws and remove the PCB board and antenna.
These are two 3.4mm Philips head screws found in the lower right corner of the phone.
Step 5
- Pull out the power button flex cable using tweezers to disconnect from the phone.
- Use the tweezers to then disconnect the touch screen flex cable.
Pull out the power button flex cable using tweezers to disconnect from the phone.
Use the tweezers to then disconnect the touch screen flex cable.
Step 6
- Remove the battery connections to the logic board.
- This is the six pin connector seen in the red box.
- Pull the battery away to remove from the back of the screen.
Remove the battery connections to the logic board.
This is the six pin connector seen in the red box.
Pull the battery away to remove from the back of the screen.
Step 7
- CAUTION: carefully remove the top speaker from the phone using tweezers.
CAUTION: carefully remove the top speaker from the phone using tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Jason Melo
Member since: 08/26/2015
483 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 3-3, Eyestone Fall 2015
Member of USF Tampa, Team 3-3, Eyestone Fall 2015
USFT-EYESTONE-F15S3G3
3 Members
10 Guides authored