Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
2
- Back Case
- 4 steps
- Camera
- 4 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackHTC Hero 200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Back Case
- Remove the back of the phone by pushing firmly with your thumbs up towards the camera.
- Remove both the battery and the SD card (Press SD card in to release)
- Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.
Remove the back of the phone by pushing firmly with your thumbs up towards the camera.
Remove both the battery and the SD card (Press SD card in to release)
Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.
1024
Step 2
- Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.
- Insert the flat end between the back and front enclosure, working your way around the rim.
Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.
Insert the flat end between the back and front enclosure, working your way around the rim.
Step 3
- Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.
- It is best to start with the tab found on the top center of the phone, as it is easiest to locate.
Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.
It is best to start with the tab found on the top center of the phone, as it is easiest to locate.
Step 4
- Carefully separate the front and back enclosures once all of the clips have been disengaged.
- Be sure to not separate too quickly or you risk breaking an attached tab.
Carefully separate the front and back enclosures once all of the clips have been disengaged.
Be sure to not separate too quickly or you risk breaking an attached tab.
Step 5
Camera
- Locate the four metal tabs on the top and bottom of the camera holding the camera enclosure to the motherboard.
Locate the four metal tabs on the top and bottom of the camera holding the camera enclosure to the motherboard.
Step 6
- Using a pair of metal tweezers, simultaneously depress both tabs on one side of the camera enclosure and gently pull up until tabs come free. Repeat for the opposite side.
Using a pair of metal tweezers, simultaneously depress both tabs on one side of the camera enclosure and gently pull up until tabs come free. Repeat for the opposite side.
Step 7
- Pull the released camera enclosure away from the motherboard until it is completely free.
Pull the released camera enclosure away from the motherboard until it is completely free.
Step 8
- Now with camera unit exposed, gently wiggle the camera as you pull away from the phone to remove it.
Now with camera unit exposed, gently wiggle the camera as you pull away from the phone to remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Max Brown
Member since: 01/23/2012
139 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 3-26, Amido Winter 2012
Member of Cal Poly, Team 3-26, Amido Winter 2012
CPSU-AMIDO-W12S3G26
5 Members
12 Guides authored
