Htc Hero Back Case Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Back Case
• 4 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

• BackHTC Hero 200

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Case               

• Remove the back of the phone by pushing firmly with your thumbs up towards the camera.
• Remove both the battery and the SD card (Press SD card in to release)
• Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

Remove the back of the phone by pushing firmly with your thumbs up towards the camera.

Remove both the battery and the SD card (Press SD card in to release)

Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

1024

Step 2

• Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.
• Insert the flat end between the back and front enclosure, working your way around the rim.

Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.

Insert the flat end between the back and front enclosure, working your way around the rim.

Step 3

• Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.
• It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.

It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

Step 4

• Carefully separate the front and back enclosures once all of the clips have been disengaged.
• Be sure to not separate too quickly or you risk breaking an attached tab.

Carefully separate the front and back enclosures once all of the clips have been disengaged.

Be sure to not separate too quickly or you risk breaking an attached tab.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Max Brown                     

Member since: 01/23/2012

139 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 3-26, Amido Winter 2012                        

                                                  Member of Cal Poly, Team 3-26, Amido Winter 2012 



                    CPSU-AMIDO-W12S3G26                     


                                            5 Members                     


                                            12 Guides authored