Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Midframe
  • 2 steps
  • Phone Speaker
  • 2 steps

Flags

1

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackHTC HD2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Carefully pull the rear cover from the back of the phone.
  • Place a finger beneath the small lip on the left side of the battery.

Carefully pull the rear cover from the back of the phone.

Place a finger beneath the small lip on the left side of the battery.

1024

Step 2

  • Lay the phone down on it’s screen.
  • Lift up on the lip and pull the battery from the phone.

Lay the phone down on it’s screen.

Lift up on the lip and pull the battery from the phone.

Step 3

              Midframe
  • Remove the four black 3.5mm T5 screws from the back of the phone.

Remove the four black 3.5mm T5 screws from the back of the phone.

Step 4

  • Insert the flat end of a spudger between the midframe and the display.
  • Slide the spudger along the seam between the frame and the display.
  • Using the spudger for leverage, carefully pry the midframe away from the display assembly.
  • This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.
  • As it releases, pull the midframe away from the phone.
  • The volume control tab may fall off during removal. It can be easily reattached.

Insert the flat end of a spudger between the midframe and the display.

Slide the spudger along the seam between the frame and the display.

Using the spudger for leverage, carefully pry the midframe away from the display assembly.

This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.

As it releases, pull the midframe away from the phone.

The volume control tab may fall off during removal. It can be easily reattached.

Step 5

              Phone Speaker
  • With the chassis removed, set down the phone and locate the speaker on the inside of the housing.
  • The speaker should be easily popped out of place with a small amount of force

With the chassis removed, set down the phone and locate the speaker on the inside of the housing.

The speaker should be easily popped out of place with a small amount of force

Step 6

  • Congratulations! The speaker is now removed and can be replaced or repaired.

Congratulations! The speaker is now removed and can be replaced or repaired.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Nathan Puchalski

Member since: 04/26/2011

813 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 24-55, Amido Spring 2011                        

                                                  Member of Cal Poly, Team 24-55, Amido Spring 2011 



                    CPSU-AMIDO-S11S24G55                     


                                            5 Members                     


                                            16 Guides authored