Difficulty
Very easy
Steps
5
Time Required
3 - 5 minutes
Sections
1
- Camera Lens
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackHTC EVO Design 4G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Camera Lens
- Tools Needed: 1. Safety pry tool (guitar pick), 2. Tweezers, 3. Phillips Screwdriver, 4. Star tip Precision Screwdriver, 5. Flathead Screwdriver
Tools Needed: 1. Safety pry tool (guitar pick), 2. Tweezers, 3. Phillips Screwdriver, 4. Star tip Precision Screwdriver, 5. Flathead Screwdriver
1024
Step 2
Step 2
- Use your safety pry tool on the outside edges of the back casing to lift and remove it
Use your safety pry tool on the outside edges of the back casing to lift and remove it
Step 3
Step 3
- Take your flathead and stick it into the holes to the left of the lens and carefully work your way around the perimeter pushing up the lens until it snaps off
Take your flathead and stick it into the holes to the left of the lens and carefully work your way around the perimeter pushing up the lens until it snaps off
Step 4
Step 4
- Remove old lens.
- Place replacement lens over the camera lens and it should loosely snap on
- Info*: Don’t worry if the cover is loose because the cover of the phone would hold it in place
Remove old lens.
Place replacement lens over the camera lens and it should loosely snap on
Info*: Don’t worry if the cover is loose because the cover of the phone would hold it in place
Step 5
Step 5
- Snap the cover back into place
Snap the cover back into place
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Victoria
Member since: 10/23/2014
94 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team 5-4, Vijaybhaskar Fall 2014
Member of UMass Dartmouth, Team 5-4, Vijaybhaskar Fall 2014
UMASSD-VIJAYBHASKAR-F14S5G4
3 Members
3 Guides authored