Htc Evo 4G Stand Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes            

Sections

2

• Battery
• 3 steps
• Stand
• 4 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHTC Evo 4G

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Remove the back case of the phone with a plastic opening tool by placing the tool in the tab on the back of the phone.

Remove the back case of the phone with a plastic opening tool by placing the tool in the tab on the back of the phone.

1024

Step 2

• Remove the battery from the phone by carefully lifting it out with your fingers.

Remove the battery from the phone by carefully lifting it out with your fingers.

Step 3

• Set the battery aside for disposal. You are now ready to insert a new battery.

Set the battery aside for disposal. You are now ready to insert a new battery.

Step 4

              Stand               

• you should remove the six T5 screws holding the Inner frame in place. Be careful not to loose the screws

you should remove the six T5 screws holding the Inner frame in place. Be careful not to loose the screws

Step 5

• Using the plastic opening tools again, gently pry the inner frame apart from the rest of the phone
• Remove the inner frame from the rest of the phone by lifting it off

Using the plastic opening tools again, gently pry the inner frame apart from the rest of the phone

Remove the inner frame from the rest of the phone by lifting it off

Step 6

• Remove the five screws that are holding the stand in place.

Remove the five screws that are holding the stand in place.

Step 7

• Remove the stand from the frame by lifting it out. Clear any debis causing it to be jammed, or replace with new stand.

Remove the stand from the frame by lifting it out. Clear any debis causing it to be jammed, or replace with new stand.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Sage Jurado                     

Member since: 03/13/2014

1,104 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       New Mexico State, Team 1-1, Easley Spring 2014                        

                                                  Member of New Mexico State, Team 1-1, Easley Spring 2014 



                    NMSU-EASLEY-S14S1G1                     


                                            5 Members                     


                                            5 Guides authored