Difficulty
Moderate
Steps
4
Time Required
20 minutes
Sections
1
- Battery
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackHTC Desire 826
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Find a seam in the back of the device.
- Insert the plastic spudger into the seam and pry off the back panel.
- There will be glue, so keep prying until it comes off or you may need to heat up the edges of the device to loosen the adhesive with the iOpener.
Find a seam in the back of the device.
Insert the plastic spudger into the seam and pry off the back panel.
There will be glue, so keep prying until it comes off or you may need to heat up the edges of the device to loosen the adhesive with the iOpener.
1024
Step 2
- Remove the 4.0 mm screw above the battery with a T5 Torx screwdriver.
- Remove the metal bracket with the tweezers.
Remove the 4.0 mm screw above the battery with a T5 Torx screwdriver.
Remove the metal bracket with the tweezers.
Step 3
- Disconnect the battery cable from the motherboard with the tweezers.
Disconnect the battery cable from the motherboard with the tweezers.
Step 4
- Lift the battery with a plastic spudger and remove it from the device.
Lift the battery with a plastic spudger and remove it from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Jordan Warnix
Member since: 09/04/2019
285 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
University of Alabama, Team S1-G2, Bedsole Fall 2019
Member of University of Alabama, Team S1-G2, Bedsole Fall 2019
UA-BEDSOLE-F19S1G2
4 Members
10 Guides authored
