Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes            

Sections

4

  • Battery
  • 2 steps
  • Rear Panel
  • 2 steps
  • Printed Circuit Board (PCB)
  • 2 steps
  • Bottom Speaker
  • 1 step

Flags

0

  • BackHTC Desire 700 Dual Sim

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover               
  • Use the spudger to pry the back cover off.

Use the spudger to pry the back cover off.

1024

Step 2

              Removing Battery               
  • Use spudger tool to pry under the battery to lift it up and out.

Use spudger tool to pry under the battery to lift it up and out.

Step 3

              Remove 8 Torx Screws               
  • Remove eight 8.3mm T4 screws with the Torx screwdriver.

Remove eight 8.3mm T4 screws with the Torx screwdriver.

Step 4

              Prying Off Rear Panel               
  • Pry the back panel of the screen using the plastic opener.
  • Work your way gently around the device, using picks as necessary to keep the back panel separated.
  • Use caution not to damage the device, as it takes force to remove the rear panel.

Pry the back panel of the screen using the plastic opener.

Work your way gently around the device, using picks as necessary to keep the back panel separated.

Use caution not to damage the device, as it takes force to remove the rear panel.

Step 5

              Printed Circuit Board (PCB)               
  • Disconnect wire going from the printed circuit board to the motherboard using the tweezers.

Disconnect wire going from the printed circuit board to the motherboard using the tweezers.

Step 6

  • Using the plastic prying tool, pry the PCB device from the screen of the phone.

Using the plastic prying tool, pry the PCB device from the screen of the phone.

Step 7

              Bottom Speaker               
  • Using the spudger, pry the speaker away from the screen.

Using the spudger, pry the speaker away from the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Steven Pate                     

Member since: 09/23/2014

191 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 9-3, Blackwell Fall 2014                        

                                                  Member of USF Tampa, Team 9-3, Blackwell Fall 2014 



                    USFT-BLACKWELL-F14S9G3                     


                                            4 Members                     


                                            14 Guides authored                     

siv kumar - May 14, 2016

Reply

Mobile spekar