Htc Desire 626S Loud Speaker Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          9 minutes

Sections

Backplate
3 steps
Loud Speaker
2 steps

Flags

BackHTC Desire 626s
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Backplate

Insert plastic opening tool in between the back cover and grey plastic.
Gently work your way around the phone while sliding the tool.
Gently pry on plastic cover as needed to release fasteners.

Insert plastic opening tool in between the back cover and grey plastic.

Gently work your way around the phone while sliding the tool.

Gently pry on plastic cover as needed to release fasteners.

1024

Step 2

There are 7 screws you need to remove before prying the secondary cover off. You will need to use the JIS #000 screwdriver and the T5 Torx screwdriver to remove these screws.
There is a screw under the “void” sticker.

There are 7 screws you need to remove before prying the secondary cover off. You will need to use the JIS #000 screwdriver and the T5 Torx screwdriver to remove these screws.

There is a screw under the “void” sticker.

Step 3

Once the screws are removed, use the plastic opening tool to remove the remaining plastic cover.
Start from the corners of the phone, and insert the plastic opening tool between the outer colored rim and the screen.
This portion of the cover will be more difficult to remove than the initial back cover. Be patient and gentle around the button holes.

Once the screws are removed, use the plastic opening tool to remove the remaining plastic cover.

Start from the corners of the phone, and insert the plastic opening tool between the outer colored rim and the screen.

This portion of the cover will be more difficult to remove than the initial back cover. Be patient and gentle around the button holes.

Step 4

              Loud Speaker

Use tweezers to lift the speaker straight up.
You can locate the loudspeaker at the base of the phone; it should have a white sticker on it.

Use tweezers to lift the speaker straight up.

You can locate the loudspeaker at the base of the phone; it should have a white sticker on it.

Step 5

Wiggle the loudspeaker with the tweezers if it does not at first come out.
Congratulations you have successfully removed the loudspeaker.

Wiggle the loudspeaker with the tweezers if it does not at first come out.

Congratulations you have successfully removed the loudspeaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Blake Bartlett

Member since: 04/03/2019

732 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Oregon Institute of Technology, Team S2-G7, Lancaster Spring 2019                        

                                                  Member of Oregon Institute of Technology, Team S2-G7, Lancaster Spring 2019 



                    OIT-LANCASTER-S19S2G7                     


                                            3 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team