Difficulty
Moderate
Steps
6
Time Required
30 seconds - 45 minutes
Sections
1
- Micro USB Port
- 6 steps
Flags
0
BackHTC Desire 530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Micro USB Port
- Remove the four 1.2mm screws in each corner.
- Use the suction cup and plastic opening tool to pry the screen from the body.
Remove the four 1.2mm screws in each corner.
Use the suction cup and plastic opening tool to pry the screen from the body.
1024
Step 2
- Gently pry the battery up at these three spots, and disconnect the power cables attached.
Gently pry the battery up at these three spots, and disconnect the power cables attached.
Step 3
- You can then fold the battery back like so, and that will give you access to the screw.
You can then fold the battery back like so, and that will give you access to the screw.
Step 4
- Use the screwdriver to remove the 1.2 mm screw at the bottom of the phone.
Use the screwdriver to remove the 1.2 mm screw at the bottom of the phone.
Step 5
- Once the screw and the black plastic backing are removed the daughterboard pulls right out.
Once the screw and the black plastic backing are removed the daughterboard pulls right out.
Step 6
- In order to fix the Micro USB Port, the entire daughterboard will need to be replaced because all connections are soldered in.
In order to fix the Micro USB Port, the entire daughterboard will need to be replaced because all connections are soldered in.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Eric Blackstock
Member since: 10/24/2018
379 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
UMASSD-PEAK-F18S3G2
Member of UMASSD-PEAK-F18S3G2
Community
3 Members
10 Guides authored
