Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes

Sections

2

  • Loudspeaker (Ringer)
  • 2 steps
  • Logic Board
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHTC Desire 510

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              BATTERY REMOVAL
  • Switch off the phone, remove the battery and any installed SIM and memory cards.
  • Remove 7x Torx T5 screws.

Switch off the phone, remove the battery and any installed SIM and memory cards.

Remove 7x Torx T5 screws.

1024

Step 2

              REAR BEZEL REMOVAL
  • Use a plastic tool to remove the rear bezel.
  • The loudspeaker is on the inner side of the rear bezel.

Use a plastic tool to remove the rear bezel.

The loudspeaker is on the inner side of the rear bezel.

Step 3

              FLEX CABLES DISCONNECTING
  • Disconnect the touch screen flex cable.
  • Disconnect the light sensor flex cable.
  • Unstuck the vibra-motor from the middle frame.
  • Remove the coaxial antenna cable from the middle frame.
  • The LCD display flex cable is connected to the bottom side of the board.

Disconnect the touch screen flex cable.

Disconnect the light sensor flex cable.

Unstuck the vibra-motor from the middle frame.

Remove the coaxial antenna cable from the middle frame.

The LCD display flex cable is connected to the bottom side of the board.

Step 4

              LOGIC BOARD REMOVAL
  • At the upper left side, the board is held by a plastic locking clip. Use a plastic tool and start the separating from here.
  • Gently disconnect the LCD display flex cable.
  • Now remove the logic board.

At the upper left side, the board is held by a plastic locking clip. Use a plastic tool and start the separating from here.

Gently disconnect the LCD display flex cable.

Now remove the logic board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35





                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored