Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes

Sections

3

  • Loudspeaker (Ringer)
  • 2 steps
  • Logic Board
  • 2 steps
  • Front and Main Cameras
  • 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHTC Desire 510

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              BATTERY REMOVAL
  • Switch off the phone, remove the battery and any installed SIM and memory cards.
  • Remove 7x Torx T5 screws.

Switch off the phone, remove the battery and any installed SIM and memory cards.

Remove 7x Torx T5 screws.

1024

Step 2

              REAR BEZEL REMOVAL
  • Use a plastic tool to remove the rear bezel.
  • The loudspeaker is on the inner side of the rear bezel.

Use a plastic tool to remove the rear bezel.

The loudspeaker is on the inner side of the rear bezel.

Step 3

              FLEX CABLES DISCONNECTING
  • Disconnect the touch screen flex cable.
  • Disconnect the light sensor flex cable.
  • Unstuck the vibra-motor from the middle frame.
  • Remove the coaxial antenna cable from the middle frame.
  • The LCD display flex cable is connected to the bottom side of the board.

Disconnect the touch screen flex cable.

Disconnect the light sensor flex cable.

Unstuck the vibra-motor from the middle frame.

Remove the coaxial antenna cable from the middle frame.

The LCD display flex cable is connected to the bottom side of the board.

Step 4

              LOGIC BOARD REMOVAL
  • At the upper left side, the board is held by a plastic locking clip. Use a plastic tool and start the separating from here.
  • Gently disconnect the LCD display flex cable.
  • Now remove the logic board.

At the upper left side, the board is held by a plastic locking clip. Use a plastic tool and start the separating from here.

Gently disconnect the LCD display flex cable.

Now remove the logic board.

Step 5

              Front and Main Cameras
  • Main / Rear camera.
  • New line.

Main / Rear camera.

New line.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35





                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored