Hp Z2 Mini G3 Access Panel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          1 minute

Sections

Access Panel
3 steps

Flags

BackHP Z2 Mini G3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Be sure to turn off the device and disconnect the A/C power cord before removing the panel.

Components inside the device are also subject to static damage, so try and work on a hard surface to reduce this risk.

Step 1

              Access Panel

Turn the device so the back-side of the device is facing you.
Be sure that the power is off and the A/C power cord has been disconnected before starting. Removing hardware while the power is on could damage the device or harm yourself.
Components of the device are subject to static damage. Work on a hard, grounded surface to prevent damage to the workstation.

Turn the device so the back-side of the device is facing you.

Be sure that the power is off and the A/C power cord has been disconnected before starting. Removing hardware while the power is on could damage the device or harm yourself.

Components of the device are subject to static damage. Work on a hard, grounded surface to prevent damage to the workstation.

1024

Step 2

Slide and hold the latch in the direction of the engraved arrow (to the right).

Slide and hold the latch in the direction of the engraved arrow (to the right).

Step 3

While holding the latch, lift the access panel upwards and towards yourself and set it aside upside-down.

While holding the latch, lift the access panel upwards and towards yourself and set it aside upside-down.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Christian Ogburn

Member since: 01/14/2020

475 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Embry-Riddle Aeronautical University, Team S16-G4, Branham Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S16-G4, Branham Spring 2020 



                    ERAU-BRANHAM-S20S16G4                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

#

#

#

#

#

Team#

#

Introduction

Team