Difficulty
Moderate
Steps
9
Time Required
5 minutes
Sections
2
- Battery
- 8 steps
- Speaker
- 1 step
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackHP x2 10-p010wm
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
If sound is not coming out of your device or the sound is distorted, it is a sign that you need to replace your speakers
This guide will show you how to take apart the screen in order to access to its speakers. But we recommend you to check our troubleshooting page.
What you need
Step 1
Battery
- Pull the screen away from the keyboard.
Pull the screen away from the keyboard.
1024
Step 2
- Insert a spudger into the space between the screen and computer and gently pry the two pieces apart. Continue this around the whole screen.
Insert a spudger into the space between the screen and computer and gently pry the two pieces apart. Continue this around the whole screen.
Step 3
- Slowly disconnect the thin wire attaching the screen to the rest of the computer by holding one end and sliding it down.
- Do not pull up too hard; slowly slide it towards the screen.
Slowly disconnect the thin wire attaching the screen to the rest of the computer by holding one end and sliding it down.
Do not pull up too hard; slowly slide it towards the screen.
Step 4
- Remove the eight 4mm Phillips #00 screws from the metal plate.
Remove the eight 4mm Phillips #00 screws from the metal plate.
Step 5
- Slowly peel up any tape securing the wire to the metal cover.
- Remove the metal cover to access the battery.
Slowly peel up any tape securing the wire to the metal cover.
Remove the metal cover to access the battery.
Step 6
- Remove the 4mm screw on the side.
Remove the 4mm screw on the side.
Step 7
- Remove the black tape.
- Pull the battery connector towards the battery to disconnect it from its socket.
Remove the black tape.
Pull the battery connector towards the battery to disconnect it from its socket.
Step 8
- Remove the battery.
Remove the battery.
Step 9
Speaker
- Remove speakers on both sides.
Remove speakers on both sides.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Nathan Ojala
Member since: 10/30/2019
317 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team S4-G3, Saloman Fall 2019
Member of UMass Dartmouth, Team S4-G3, Saloman Fall 2019
UMASSD-SALOMAN-F19S4G3
3 Members
3 Guides authored
