Difficulty

Easy

Steps

8

Time Required

                          5 minutes

Sections

1

  • Battery
  • 8 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackHP x2 10-p010wm

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If you are having troubles charging your HP x2 10-p010wm and your device failed the battery diagnose test from HP, it is most likely that you need to a battery replacement.

This guide will show you how to take apart the screen in order to access to the battery. But we recommend you to check our troubleshooting page first.

What you need

Step 1

              Battery
  • Pull the screen away from the keyboard.

Pull the screen away from the keyboard.

1024

Step 2

  • Insert a spudger into the space between the screen and computer and gently pry the two pieces apart. Continue this around the whole screen.

Insert a spudger into the space between the screen and computer and gently pry the two pieces apart. Continue this around the whole screen.

Step 3

  • Slowly disconnect the thin wire attaching the screen to the rest of the computer by holding one end and sliding it down.
  • Do not pull up too hard; slowly slide it towards the screen.

Slowly disconnect the thin wire attaching the screen to the rest of the computer by holding one end and sliding it down.

Do not pull up too hard; slowly slide it towards the screen.

Step 4

  • Remove the eight 4mm Phillips #00 screws from the metal plate.

Remove the eight 4mm Phillips #00 screws from the metal plate.

Step 5

  • Slowly peel up any tape securing the wire to the metal cover.
  • Remove the metal cover to access the battery.

Slowly peel up any tape securing the wire to the metal cover.

Remove the metal cover to access the battery.

Step 6

  • Remove the 4mm screw on the side.

Remove the 4mm screw on the side.

Step 7

  • Remove the black tape.
  • Pull the battery connector towards the battery to disconnect it from its socket.

Remove the black tape.

Pull the battery connector towards the battery to disconnect it from its socket.

Step 8

  • Remove the battery.

Remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Vinh Phan

Member since: 10/30/2019

310 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team S4-G3, Saloman Fall 2019                        

                                                  Member of UMass Dartmouth, Team S4-G3, Saloman Fall 2019 



                    UMASSD-SALOMAN-F19S4G3                     


                                            3 Members                     


                                            3 Guides authored