Difficulty
Moderate
Steps
10
Time Required
Suggest a time??
Sections
2
- Screen
- 7 steps
- Power Supply
- 3 steps
Flags
0
BackHP w2216h
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- ‘Make sure you are grounded, the power supply is not connected and you are wearing safety goggles.
- Use the Philips #000 screwdriver to remove the 4 round12mm screws on the back panel.
‘Make sure you are grounded, the power supply is not connected and you are wearing safety goggles.
Use the Philips #000 screwdriver to remove the 4 round12mm screws on the back panel.
1024
Step 2
- Using a Philips #000 head remove 2 flat 12 mm screws above stand mounting bracket.
- Using a PH1 Philips head with the 150 mm flexible extension remove 1 Philips head screw under the stand mounting bracket.
- Stand will easily pull off.
Using a Philips #000 head remove 2 flat 12 mm screws above stand mounting bracket.
Using a PH1 Philips head with the 150 mm flexible extension remove 1 Philips head screw under the stand mounting bracket.
Stand will easily pull off.
Step 3
- Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.
- Turn monitor so that the screen is facing you.
- Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.
- The best places to pry are in the lower left and lower right corners of the black bezel.
Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.
Turn monitor so that the screen is facing you.
Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.
The best places to pry are in the lower left and lower right corners of the black bezel.
Step 4
- Be careful of the wires attaching the power button and the control buttons. Show extreme caution to ensure the button is not damaged.
- Lift the screen assembly from the plastic housing from the corners.
Be careful of the wires attaching the power button and the control buttons. Show extreme caution to ensure the button is not damaged.
Lift the screen assembly from the plastic housing from the corners.
Step 5
- Remove the 4 connectors from the left side of the monitor on the back.
Remove the 4 connectors from the left side of the monitor on the back.
Step 6
- Lift the gray tape of the top of the monitor to expose the ribbon cable.
- Remove the ribbon cable by sliding the connector towards the center of the screen assembly.
- Lift the reflective tape next to the gray tape.
Lift the gray tape of the top of the monitor to expose the ribbon cable.
Remove the ribbon cable by sliding the connector towards the center of the screen assembly.
Lift the reflective tape next to the gray tape.
Step 7
- Remove the 4 PH1 8mm Philips round screws on the outer edge of the screen’s assembly.
- Lift the screen from the screen assembly.
Remove the 4 PH1 8mm Philips round screws on the outer edge of the screen’s assembly.
Lift the screen from the screen assembly.
Step 8
Power Supply
- Monitor power supplies can be dangerous. Read ifixit’s monitor safety guide before working with power supplies.
- Remove the cables connecting the power supply to the display port.
Monitor power supplies can be dangerous. Read ifixit’s monitor safety guide before working with power supplies.
Remove the cables connecting the power supply to the display port.
Step 9
- Remove the four 8mm Phillips #000 head screws connecting the power supply to the screen assembly.
Remove the four 8mm Phillips #000 head screws connecting the power supply to the screen assembly.
Step 10
- Lift the power supply vertically out of the screen assembly
Lift the power supply vertically out of the screen assembly
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Branflakes222
Member since: 03/25/2016
393 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 1-1, Miles Spring 2016
Member of UMass Dartmouth, Team 1-1, Miles Spring 2016
UMASSD-MILES-S16S1G1
4 Members
6 Guides authored
