Difficulty
Moderate
Steps
3
Time Required
5 minutes
Sections
1
- Power Button
- 3 steps
Flags
0
BackHP w2216h
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Button
- Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.
- Turn monitor so that the screen is facing you.
- Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.
- The best places to pry are in the lower left and lower right corners of the black bezel.
Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.
Turn monitor so that the screen is facing you.
Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.
The best places to pry are in the lower left and lower right corners of the black bezel.
1024
Step 2
- Do not pull the screen away to hard, this could snap the power cable.
- Remove the power button from the top of the plastic frame.
Do not pull the screen away to hard, this could snap the power cable.
Remove the power button from the top of the plastic frame.
Step 3
- Remove the power cable by carefully sliding it out of it’s plug.
- Check if there is any tear or fray in the cable.
Remove the power cable by carefully sliding it out of it’s plug.
Check if there is any tear or fray in the cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Sadeq Taha
Member since: 03/25/2016
207 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 1-1, Miles Spring 2016
Member of UMass Dartmouth, Team 1-1, Miles Spring 2016
UMASSD-MILES-S16S1G1
4 Members
6 Guides authored
