Hp W2216H Control Buttons Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          20 minutes            

Sections

1

• Control Buttons
• 6 steps

Flags

0

• BackHP w2216h

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Control Buttons               

• Make sure you are grounded, the power supply is not connected, and you are wearing safety goggles.
• Remove the four 12 mm Phillips #000 screws on the back panel.

Make sure you are grounded, the power supply is not connected, and you are wearing safety goggles.

Remove the four 12 mm Phillips #000 screws on the back panel.

1024

Step 2

• Remove the two 12 mm Phillips #000 screws above stand mounting bracket.
• Using a Phillips #1 with the 150 mm flexible extension remove 1 Phillips #1 screw under the stand mounting bracket.
• Stand will easily pull off.

Remove the two 12 mm Phillips #000 screws above stand mounting bracket.

Using a Phillips #1 with the 150 mm flexible extension remove 1 Phillips #1 screw under the stand mounting bracket.

Stand will easily pull off.

Step 3

• Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.
• Turn monitor so that the screen is facing you.
• Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.
• The best places to pry are in the lower left and lower right corners of the black bezel.

Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.

Turn monitor so that the screen is facing you.

Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.

The best places to pry are in the lower left and lower right corners of the black bezel.

Step 4

• Lift the screen assembly from the plastic housing from the corners.

Lift the screen assembly from the plastic housing from the corners.

Step 5

• Remove the plastic buttons from the contacts

Remove the plastic buttons from the contacts

Step 6

• Remove the wire connecting the contacts to the screen assembly.

Remove the wire connecting the contacts to the screen assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Patrick Aucoin                     

Member since: 03/25/2016

221 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team 1-1, Miles Spring 2016                        

                                                  Member of UMass Dartmouth, Team 1-1, Miles Spring 2016 



                    UMASSD-MILES-S16S1G1                     


                                            4 Members                     


                                            6 Guides authored