Hp Touchsmart Iq506 Stand Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          20 minutes            

Sections

1

• Stand
• 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHP TouchSmart IQ500 Series

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The part number for the stand this system uses is the HP 507866-001 stand. Note: This part does not include screws. You will need to get the diameter with a digital caliper if you do not have the screws. I DO NOT have this information to hand right now.

What you need

Step 1

              Unplug the power supply               

• Unplug the power supply from the system.

Unplug the power supply from the system.

1024

Step 2

              Remove the RAM door               

• Unscrew the RAM door from the system. Use a Phillips #1 screwdriver. Once you do this, unclip it from the bottom and pull forward.

Unscrew the RAM door from the system. Use a Phillips #1 screwdriver. Once you do this, unclip it from the bottom and pull forward.

Step 3

              Screwdriver placement tip               

• The top screws on the hinge are a burden to remove. You will have to do something like the pictures here show to make it go a little easier.

The top screws on the hinge are a burden to remove. You will have to do something like the pictures here show to make it go a little easier.

Step 4

              Remove the stand               

• Remove the stand from the system. Use a Phillips #1 screwdriver to loosen the 4 screws. Grab the stand up to remove it from the system. There is no need to force it off.

Remove the stand from the system. Use a Phillips #1 screwdriver to loosen the 4 screws. Grab the stand up to remove it from the system. There is no need to force it off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Nick                     

Member since: 11/10/2009

80,540 Reputation

                                      41 Guides authored                  



                       Badges:
                       55







                                                        +52 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored