Difficulty

Moderate

Steps

15

Time Required

                          30 minutes

Sections

3

  • Back Cover
  • 4 steps
  • Motherboard
  • 7 steps
  • Keyboard
  • 4 steps

Flags

0

  • BackHP Stream x360 11-p015wm

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Orient the laptop to have the back cover facing upwards.
  • Remove the four rubber pads located in each corner.

Orient the laptop to have the back cover facing upwards.

Remove the four rubber pads located in each corner.

1024

Step 2

  • Tool required: JIS #1 Screwdriver
  • Using the screwdriver, remove all of the exposed screws.

Tool required: JIS #1 Screwdriver

Using the screwdriver, remove all of the exposed screws.

Step 3

  • Tool required: iFixit opening tool
  • Open the laptop and orient the keyboard facing upward.
  • Slowly wedge the opening tool into the gap between the keyboard and the back cover.
  • After loosening the back cover, close the laptop and orient the back cover facing upward. Open the cover.

Tool required: iFixit opening tool

Open the laptop and orient the keyboard facing upward.

Slowly wedge the opening tool into the gap between the keyboard and the back cover.

After loosening the back cover, close the laptop and orient the back cover facing upward. Open the cover.

Step 4

  • This is a good time to clean any accumulated dust or debris. Use this link on tips for cleaning.
  • Tool required: Tweezers
  • Carefully use tweezers to remove the audio jack connector from the motherboard.

This is a good time to clean any accumulated dust or debris. Use this link on tips for cleaning.

Tool required: Tweezers

Carefully use tweezers to remove the audio jack connector from the motherboard.

Step 5

              Motherboard
  • Remove the six 6.5 mm Phillips head screws from the battery using the JIS #00 screwdriver.

Remove the six 6.5 mm Phillips head screws from the battery using the JIS #00 screwdriver.

Step 6

  • Unplug the wire attaching to the battery to the motherboard using the tweezers.
  • Remove the battery.

Unplug the wire attaching to the battery to the motherboard using the tweezers.

Remove the battery.

Step 7

  • Remove the six 3.5 mm screws from the silver plate cover with screwdriver JIS #00.
  • Remove the silver plate cover.

Remove the six 3.5 mm screws from the silver plate cover with screwdriver JIS #00.

Remove the silver plate cover.

Step 8

  • Remove the four 3.5 mm screws from the metal arm using the JIS #00 screwdriver.

Remove the four 3.5 mm screws from the metal arm using the JIS #00 screwdriver.

Step 9

  • Detach all remaining wires from the motherboard using the tweezers.

Detach all remaining wires from the motherboard using the tweezers.

Step 10

Step 11

  • Remove the six 3.5 mm screws from the motherboard using the JIS #00 screwdriver.
  • Remove the motherboard.

Remove the six 3.5 mm screws from the motherboard using the JIS #00 screwdriver.

Remove the motherboard.

Step 12

              Keyboard
  • Remove the three 6.5 mm screws from the second screen hinge and metal arm using the JIS #00 screwdriver.
  • Remove the metal bracket.

Remove the three 6.5 mm screws from the second screen hinge and metal arm using the JIS #00 screwdriver.

Remove the metal bracket.

Step 13

  • Remove the two 3.5 mm screws from the small sideboard using the JIS #00 screwdriver.

Remove the two 3.5 mm screws from the small sideboard using the JIS #00 screwdriver.

Step 14

  • Use the blue plastic opening tool to pry up the silver keyboard cover.
  • Remove the keyboard cover.

Use the blue plastic opening tool to pry up the silver keyboard cover.

Remove the keyboard cover.

Step 15

  • Remove the keyboard.

Remove the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Megan Waxman

Member since: 11/11/2019

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team S2-G3, Stella Fall 2019                        

                                                  Member of IUPUI, Team S2-G3, Stella Fall 2019 



                    IUPUI-STELLA-F19S2G3                     


                                            3 Members                     


                                            2 Guides authored