Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

1

  • Battery
  • 6 steps

Flags

0

  • BackHP Stream x360 11 -p010nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • First, make sure the laptop is completely powered off and not charging to avoid electric shock.
  • Flip the laptop upside down then remove the seven 6.5 mm screws using a JIS J0 screwdriver.
  • Also remove the two 8.5 mm JIS J0 screws near the hinge of the laptop.
  • Peel back the two rubber feet near the hinge of the laptop to reveal and remove two more 8.5 mm JIS J0 screws.
  • The rubber feet near the speakers have no screws.

First, make sure the laptop is completely powered off and not charging to avoid electric shock.

Flip the laptop upside down then remove the seven 6.5 mm screws using a JIS J0 screwdriver.

Also remove the two 8.5 mm JIS J0 screws near the hinge of the laptop.

Peel back the two rubber feet near the hinge of the laptop to reveal and remove two more 8.5 mm JIS J0 screws.

The rubber feet near the speakers have no screws.

1024

Step 2

  • After removing all the screws, slowly and carefully lift the back cover, exposing the internal components.
  • Be careful not to damage the blue strip when opening the back case.

After removing all the screws, slowly and carefully lift the back cover, exposing the internal components.

Be careful not to damage the blue strip when opening the back case.

Step 3

  • Carefully detach the blue strip that connects the back cover to the internals.
  • Make sure the blue tab is facing upwards when reassembling.

Carefully detach the blue strip that connects the back cover to the internals.

Make sure the blue tab is facing upwards when reassembling.

Step 4

  • Using the JIS J0 screwdriver, unscrew the 6.5 mm screws surrounding the battery.

Using the JIS J0 screwdriver, unscrew the 6.5 mm screws surrounding the battery.

Step 5

  • Carefully remove the surrounding wire away from the battery

Carefully remove the surrounding wire away from the battery

Step 6

  • Lastly, unhook the clip connecting the battery to the motherboard by pushing it away from the slot.
  • At this point, everything should be disconnected, simply remove the battery. Be sure to maneuver around the wire that runs between the middle of the battery.

Lastly, unhook the clip connecting the battery to the motherboard by pushing it away from the slot.

At this point, everything should be disconnected, simply remove the battery. Be sure to maneuver around the wire that runs between the middle of the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 3 other contributors 


                    Abdulaziz Alkulaib

Member since: 03/09/2017

116 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       USF Tampa, Team S7-G4, Cagle Spring 2017                        

                                                  Member of USF Tampa, Team S7-G4, Cagle Spring 2017 



                    USFT-CAGLE-S17S7G4                     


                                            4 Members                     


                                            1 Guide authored