Difficulty
Moderate
Steps
6
Time Required
Suggest a time??
Sections
2
- Midframe
- 4 steps
- Front-Facing Camera
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackHP Stream 8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Midframe
- Use your nail or a spudger to pry the back cover off of the device.
Use your nail or a spudger to pry the back cover off of the device.
1024
Step 2
- Slide your finger around the rest of the back cover, lifting it completely off of the device.
Slide your finger around the rest of the back cover, lifting it completely off of the device.
Step 3
- Remove ten Phillips #00 screws from the inside cover.
Remove ten Phillips #00 screws from the inside cover.
Step 4
- Pry up the inside cover the same way as in the first step.
Pry up the inside cover the same way as in the first step.
Step 5
Front-Facing Camera
- Lift up on the small black tab at the connection point to unlock the flex ribbon cable using the tweezers.
Lift up on the small black tab at the connection point to unlock the flex ribbon cable using the tweezers.
Step 6
- Remove the front facing camera with tweezers.
Remove the front facing camera with tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Nick Miller
Member since: 04/11/2016
669 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 34-14, Maness Spring 2016
Member of Cal Poly, Team 34-14, Maness Spring 2016
CPSU-MANESS-S16S34G14
4 Members
12 Guides authored
