Difficulty
Moderate
Steps
16
Time Required
40 minutes - 1 hour
Sections
5
- Midframe
- 4 steps
- Front-Facing Camera
- 2 steps
- Rear-Facing Camera
- 2 steps
- Motherboard
- 6 steps
- Battery
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackHP Stream 8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Midframe
- Use your nail or a spudger to pry the back cover off of the device.
Use your nail or a spudger to pry the back cover off of the device.
1024
Step 2
- Slide your finger around the rest of the back cover, lifting it completely off of the device.
Slide your finger around the rest of the back cover, lifting it completely off of the device.
Step 3
- Remove ten Phillips #00 screws from the inside cover.
Remove ten Phillips #00 screws from the inside cover.
Step 4
- Pry up the inside cover the same way as in the first step.
Pry up the inside cover the same way as in the first step.
Step 5
Front-Facing Camera
- Lift up on the small black tab at the connection point to unlock the flex ribbon cable using the tweezers.
Lift up on the small black tab at the connection point to unlock the flex ribbon cable using the tweezers.
Step 6
- Remove the front facing camera with tweezers.
Remove the front facing camera with tweezers.
Step 7
Rear-Facing Camera
- Carefully pry up the gray metal piece on the end of the flex ribbon cable using tweezers.
Carefully pry up the gray metal piece on the end of the flex ribbon cable using tweezers.
Step 8
- Remove the back facing camera with the tweezers.
Remove the back facing camera with the tweezers.
Step 9
Motherboard
- Carefully remove the battery connector from the system board using the tweezers.
Carefully remove the battery connector from the system board using the tweezers.
Step 10
- Lift up on the small black tab to unlock the LCD screen flex ribbon cable using the tweezers.
Lift up on the small black tab to unlock the LCD screen flex ribbon cable using the tweezers.
Step 11
- Carefully remove the LCD screen flex ribbon cable from the system board using the tweezers.
Carefully remove the LCD screen flex ribbon cable from the system board using the tweezers.
Step 12
- Carefully remove the USB flex ribbon cable from the connection point on the system board using the tweezers.
Carefully remove the USB flex ribbon cable from the connection point on the system board using the tweezers.
Step 13
- Remove the two Phillips using the screwdriver with a PH00 Phillips head.
Remove the two Phillips using the screwdriver with a PH00 Phillips head.
Step 14
- Remove the motherboard from the device.
Remove the motherboard from the device.
Step 15
Battery
- Remove the 6 PH00 Phillips screws.
Remove the 6 PH00 Phillips screws.
Step 16
- The battery can now be removed from the device.
The battery can now be removed from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 8 other contributors
Nick Miller
Member since: 04/11/2016
669 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 34-14, Maness Spring 2016
Member of Cal Poly, Team 34-14, Maness Spring 2016
CPSU-MANESS-S16S34G14
4 Members
12 Guides authored
Marlon Ultado - Sep 2, 2020
Reply
We’re I can buy battery for stream 8 tablet 4000mah
GAVALDA - Nov 4, 2022
Reply
Bonjour,
pouvez-vous m’indiquer où je pourrais trouver une batterie compatible ?
Bien cordialement
