Difficulty

Moderate

Steps

9

Time Required

                          25 minutes

Sections

2

  • HP Stream 13-c010nr Disassembly
  • 4 steps
  • Display
  • 5 steps

Flags

0

  • BackHP Stream 13-c010nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              HP Stream 13-c010nr Disassembly
  • Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

1024

Step 2

  • Remove the thirteen 5mm Phillips #0 screws from the bottom case.

Remove the thirteen 5mm Phillips #0 screws from the bottom case.

Step 3

  • Flip the laptop over and open it up.
  • Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.
  • Lift up the keyboard.
  • Ribbon cables still connect the two pieces.

Flip the laptop over and open it up.

Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

Lift up the keyboard.

Ribbon cables still connect the two pieces.

Step 4

  • Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.
  • Pull up the ribbon cables from their sockets.

Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

Pull up the ribbon cables from their sockets.

Step 5

              Display
  • Remove the screw covers from the bottom corner edges of the screen.

Remove the screw covers from the bottom corner edges of the screen.

Step 6

  • Remove the two 5mm Phillips #0 screws from the screen bezel.

Remove the two 5mm Phillips #0 screws from the screen bezel.

Step 7

  • Wedge the plastic opening tool between the frame of the screen and the casing of the laptop.
  • Pry upwards on the plastic opening tool to separate the bezel from the display.

Wedge the plastic opening tool between the frame of the screen and the casing of the laptop.

Pry upwards on the plastic opening tool to separate the bezel from the display.

Step 8

  • Remove the four 3mm Phillips #0 screws from the screen.

Remove the four 3mm Phillips #0 screws from the screen.

Step 9

  • Use a spudger to flip up the retaining flap on the screen ribbon cable ZIF socket.
  • Pull the ribbon cable out of the ZIF socket.
  • Remove the screen.

Use a spudger to flip up the retaining flap on the screen ribbon cable ZIF socket.

Pull the ribbon cable out of the ZIF socket.

Remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Keegan Lapham

Member since: 02/22/2018

738 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S1-G3, Cagle Spring 2018                        

                                                  Member of USF Tampa, Team S1-G3, Cagle Spring 2018 



                    USFT-CAGLE-S18S1G3                     


                                            4 Members                     


                                            12 Guides authored