Difficulty
Easy
Steps
4
Time Required
10 - 15 minutes
Sections
2
- Keyboard
- 2 steps
- Battery
- 2 steps
Flags
0
BackHP Stream 13-c002dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Begin by placing your laptop on a clean surface such as a table and away from any liquids which may spill and damage components.
- Flip the laptop over so the bottom is facing up and use your Phillips #0 screwdriver to remove the 11 visible 5mm screws on the back.
- There are some screws underneath the rubber feet. Remove them to gain access
- Unscrew the two remaining 2.5mm screws. Keep these screws separate from the first eleven 5mm screws.
Begin by placing your laptop on a clean surface such as a table and away from any liquids which may spill and damage components.
Flip the laptop over so the bottom is facing up and use your Phillips #0 screwdriver to remove the 11 visible 5mm screws on the back.
There are some screws underneath the rubber feet. Remove them to gain access
Unscrew the two remaining 2.5mm screws. Keep these screws separate from the first eleven 5mm screws.
1024
Step 2
- Flip the laptop back over onto its normal side up and raise the screen. Using the metal spudger, separate the keyboard surface from the bottom of the laptop.
- While lifting the keyboard surface from the bottom, you will notice three cables still attaching them together. Gently unplug each of these cables from the motherboard.
- With the screen and keyboard parts of the laptop removed, you have access to the laptop’s internal components.
Flip the laptop back over onto its normal side up and raise the screen. Using the metal spudger, separate the keyboard surface from the bottom of the laptop.
While lifting the keyboard surface from the bottom, you will notice three cables still attaching them together. Gently unplug each of these cables from the motherboard.
With the screen and keyboard parts of the laptop removed, you have access to the laptop’s internal components.
Step 3
Battery
- Use the Phillips #0 to remove four screws from the top of the battery labeled A.
- Use the Phillips #0 screwdriver to remove four screws labeled holding the battery to the case.
Use the Phillips #0 to remove four screws from the top of the battery labeled A.
Use the Phillips #0 screwdriver to remove four screws labeled holding the battery to the case.
Step 4
- Coming from the upper middle of the battery, there are cables which connect the battery to the motherboard. Gently remove this group of cables from the socket that it is in on the motherboard.
- Lift the battery out.
Coming from the upper middle of the battery, there are cables which connect the battery to the motherboard. Gently remove this group of cables from the socket that it is in on the motherboard.
Lift the battery out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 6 other contributors
Matthew Dodge
Member since: 01/23/2018
416 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
Western Carolina University, Team S1-G1, Virtue Spring 2018
Member of Western Carolina University, Team S1-G1, Virtue Spring 2018
WCU-VIRTUE-S18S1G1
4 Members
11 Guides authored