Hp Stream 11 D020Nr Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 10 minutes

Sections

Lower Case
4 steps
Keyboard
2 steps

Flags

BackHP Stream 11-d020nr
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Lower Case

Before disassembly, unplug and power off the Stream 11.
Pry off the two elliptical rubber inserts (one in each corner).
Pry off the two circular rubber inserts below the removed elliptical inserts (one in each corner).

Before disassembly, unplug and power off the Stream 11.

Pry off the two elliptical rubber inserts (one in each corner).

Pry off the two circular rubber inserts below the removed elliptical inserts (one in each corner).

1024

Step 2

Remove the eleven 5.6 mm Phillips #00 screws.

Remove the eleven 5.6 mm Phillips #00 screws.

Step 3

Turn the computer upright and lift the screen.
Carefully use a spudger to pry the plastic keyboard cover from the base.
When using the metal spudger, be careful not to press into the components underneath the keyboard cover. If possible, use a standard spudger or plastic opening tool to remove the keyboard cover.
Work the spudger around the cover to release the clips attaching the cover to the base.
Be patient when removing the cover, as there are many clips and it may take some time.

Turn the computer upright and lift the screen.

Carefully use a spudger to pry the plastic keyboard cover from the base.

When using the metal spudger, be careful not to press into the components underneath the keyboard cover. If possible, use a standard spudger or plastic opening tool to remove the keyboard cover.

Work the spudger around the cover to release the clips attaching the cover to the base.

Be patient when removing the cover, as there are many clips and it may take some time.

Step 4

Disconnect the cable connecting the ClickPad to the base.
Remove the plastic keyboard cover.
The cover is attached to the ClickPad by a cable. Be careful not to lift the cover too far so you do not damage this cable.

Disconnect the cable connecting the ClickPad to the base.

Remove the plastic keyboard cover.

The cover is attached to the ClickPad by a cable. Be careful not to lift the cover too far so you do not damage this cable.

Step 5

              Keyboard

Tilt the top of the keyboard plate up until you separate it from the base.
Tilt the keyboard toward you slowly but do not remove it, it is still connected with ribbon cables.

Tilt the top of the keyboard plate up until you separate it from the base.

Tilt the keyboard toward you slowly but do not remove it, it is still connected with ribbon cables.

Step 6

Lift up the retaining flaps on the ZIF connectors securing the two keyboard ribbon cables.
After disengaging the connectors, gently unplug both ribbon cables.

Lift up the retaining flaps on the ZIF connectors securing the two keyboard ribbon cables.

After disengaging the connectors, gently unplug both ribbon cables.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 3 other contributors

                    Spenser Mason

Member since: 02/04/2016

1,738 Reputation

                                      6 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       USF Tampa, Team 3-5, Wollert Spring 2016                        

                                                  Member of USF Tampa, Team 3-5, Wollert Spring 2016 



                    USFT-WOLLERT-S16S3G5                     


                                            5 Members                     


                                            19 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team