Hp Stream 11 D010Nr Clickpad Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Keyboard
6 steps
Clickpad
2 steps

Flags

BackHP Stream 11-d010nr
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Keyboard

Unplug and turn off the HP Stream 11 before disassembling the device.
Pry off the two elliptical rubber inserts (one in each corner).
Pry off the two circular rubber inserts below the removed elliptical inserts (one in each corner).

Unplug and turn off the HP Stream 11 before disassembling the device.

Pry off the two elliptical rubber inserts (one in each corner).

Pry off the two circular rubber inserts below the removed elliptical inserts (one in each corner).

1024

Step 2

Remove the eleven 5.6 mm Phillips #1 screws.

Remove the eleven 5.6 mm Phillips #1 screws.

Step 3

Using an iFixit opening tool, pry open the case to separate the keyboard from the main body.
HP Stream 11s tend to be really difficult to open. If your device is not opening with a standard iFixit opening tool, use a nylon spudger, then the metal spudger, or a metal Jimmy as the last resort.
When using the metal spudger or Jimmy, be careful not to bring these tools into contact with any electronic components of the device as this can damage the device.

Using an iFixit opening tool, pry open the case to separate the keyboard from the main body.

HP Stream 11s tend to be really difficult to open. If your device is not opening with a standard iFixit opening tool, use a nylon spudger, then the metal spudger, or a metal Jimmy as the last resort.

When using the metal spudger or Jimmy, be careful not to bring these tools into contact with any electronic components of the device as this can damage the device.

Step 4

Slowly lift the keyboard as there are multiple ribbon cables that could easily be damaged if lifted with force.
Carefully lift the keyboard and locate the three ribbon cables connecting the main body of the laptop to the keyboard.

Slowly lift the keyboard as there are multiple ribbon cables that could easily be damaged if lifted with force.

Carefully lift the keyboard and locate the three ribbon cables connecting the main body of the laptop to the keyboard.

Step 5

Using your fingernail, lift the flaps on the ZIF connectors that are securing the three ribbon cables.
Carefully disconnect the three ribbon cables.

Using your fingernail, lift the flaps on the ZIF connectors that are securing the three ribbon cables.

Carefully disconnect the three ribbon cables.

Step 6

Lift the keyboard out of the laptop to remove it from the device.

Lift the keyboard out of the laptop to remove it from the device.

Step 7

              Clickpad

Remove the two 2mm #000 Phillips screws.

Remove the two 2mm #000 Phillips screws.

Step 8

Release the clickpad by lifting the keyboard up.
When installing the new clickpad, make sure the black tabs go into the laptop.

Release the clickpad by lifting the keyboard up.

When installing the new clickpad, make sure the black tabs go into the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Josh Corrigan

Member since: 01/24/2019

341 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S1-G3, White Winter 2019                        

                                                  Member of Cal Poly, Team S1-G3, White Winter 2019 



                    CPSU-WHITE-W19S1G3                     


                                            4 Members                     


                                            11 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team