Hp Spectre X360 13T 4000 Speakers Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          4 - 15 minutes            

Sections

3

• Backplate
• 2 steps
• Battery
• 1 step
• Speakers
• 2 steps

Flags

0

• BackHP Spectre x360 13t-4000

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Backplate               

• Turn off and unplug the laptop.
• Flip over the laptop so that the bottom backplate is exposed.

Turn off and unplug the laptop.

Flip over the laptop so that the bottom backplate is exposed.

1024

Step 2

• With a hex T5 screwdriver remove the six 3mm screws holding the backplate.
• Using the same screwdriver, remove the two 7mm screws.
• With all the screws removed, use a plastic opening tool to lift off the backplate.

With a hex T5 screwdriver remove the six 3mm screws holding the backplate.

Using the same screwdriver, remove the two 7mm screws.

With all the screws removed, use a plastic opening tool to lift off the backplate.

Step 3

              Battery               

• With the backplate removed, remove the four 3 mm screws securing the battery with a Phillips #1 screwdriver.
• With the screws removed, disconnect the 3 wires connected to the battery.
• Tweezers may be needed to remove the wires.

With the backplate removed, remove the four 3 mm screws securing the battery with a Phillips #1 screwdriver.

With the screws removed, disconnect the 3 wires connected to the battery.

Tweezers may be needed to remove the wires.

Step 4

              Speakers               

• With the backplate and battery removed from the device, remove the three 2mm screws using the Phillips #0 screwdriver.

With the backplate and battery removed from the device, remove the three 2mm screws using the Phillips #0 screwdriver.

Step 5

• With all three screws removed, remove the speaker assembly from the device.

With all three screws removed, remove the speaker assembly from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Michael Bisbano                     

Member since: 03/18/2019

88 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S2-G4, Simcock Spring 2019                        

                                                  Member of UMass Dartmouth, Team S2-G4, Simcock Spring 2019 



                    UMASSD-SIMCOCK-S19S2G4                     


                                            3 Members                     


                                            6 Guides authored