Difficulty
Easy
Steps
3
Time Required
6 minutes
Sections
2
- Backplate
- 2 steps
- Battery
- 1 step
Flags
0
BackHP Spectre x360 13t-4000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Backplate
- Turn off and unplug the laptop.
- Flip over the laptop so that the bottom backplate is exposed.
Turn off and unplug the laptop.
Flip over the laptop so that the bottom backplate is exposed.
1024
Step 2
- With a hex T5 screwdriver remove the six 3mm screws holding the backplate.
- Using the same screwdriver, remove the two 7mm screws.
- With all the screws removed, use a plastic opening tool to lift off the backplate.
With a hex T5 screwdriver remove the six 3mm screws holding the backplate.
Using the same screwdriver, remove the two 7mm screws.
With all the screws removed, use a plastic opening tool to lift off the backplate.
Step 3
Battery
- With the backplate removed, remove the four 3 mm screws securing the battery with a Phillips #1 screwdriver.
- With the screws removed, disconnect the 3 wires connected to the battery.
- Tweezers may be needed to remove the wires.
With the backplate removed, remove the four 3 mm screws securing the battery with a Phillips #1 screwdriver.
With the screws removed, disconnect the 3 wires connected to the battery.
Tweezers may be needed to remove the wires.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 4 other contributors
Brandon Carvalho
Member since: 03/21/2019
566 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
UMass Dartmouth, Team S2-G4, Simcock Spring 2019
Member of UMass Dartmouth, Team S2-G4, Simcock Spring 2019
UMASSD-SIMCOCK-S19S2G4
3 Members
6 Guides authored