Hp Spectre X360 13T 4000 Backplate Replacement Repair Guide

Difficulty

Easy

Steps

2

Time Required

                          3 minutes            

Sections

1

• Backplate
• 2 steps

Flags

0

• BackHP Spectre x360 13t-4000

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Backplate               

• Turn off and unplug the laptop.
• Flip over the laptop so that the bottom backplate is exposed.

Turn off and unplug the laptop.

Flip over the laptop so that the bottom backplate is exposed.

1024

Step 2

• With a hex T5 screwdriver remove the six 3mm screws holding the backplate.
• Using the same screwdriver, remove the two 7mm screws.
• With all the screws removed, use a plastic opening tool to lift off the backplate.

With a hex T5 screwdriver remove the six 3mm screws holding the backplate.

Using the same screwdriver, remove the two 7mm screws.

With all the screws removed, use a plastic opening tool to lift off the backplate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Brandon Carvalho                     

Member since: 03/21/2019

566 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       UMass Dartmouth, Team S2-G4, Simcock Spring 2019                        

                                                  Member of UMass Dartmouth, Team S2-G4, Simcock Spring 2019 



                    UMASSD-SIMCOCK-S19S2G4                     


                                            3 Members                     


                                            6 Guides authored                     

Ben - Dec 23, 2019

Reply

Any idea for previous model like acxxxx? The 5mm screw aren’t visible, bit it’s like if they are there. The corners won’t come out. Is the screws hidden deep under the rubber pad? Removed the rubber, do we need to somehow remove the plastic part on which the rubber pad are glued? If so how? They seems to be glued on