Hp Spectre X2 12 A002Dx Screen Replacement Repair Guide

Difficulty

Very difficult

Steps

Time Required

                          45 minutes - 1 hour

Sections

Screen
5 steps

Flags

BackHP Spectre x2 12-a002dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen

Make sure the device is powered off and the kick stand is retracted.
The HP Spectre should be placed on a flat surface with the keyboard detached.

Make sure the device is powered off and the kick stand is retracted.

The HP Spectre should be placed on a flat surface with the keyboard detached.

1024

Step 2

To remove the screen, there is an entire system of clips which need to be undone as well as 4 Phillips M1.5x2.7 screws.
The screws should be removed using a Phillips #000 screwdriver. There is a sticker where the laptop attaches to the keyboard.
Heat the sticker (if needed) and use fine point tweezers to grip the sticker and remove it.

To remove the screen, there is an entire system of clips which need to be undone as well as 4 Phillips M1.5x2.7 screws.

The screws should be removed using a Phillips #000 screwdriver. There is a sticker where the laptop attaches to the keyboard.

Heat the sticker (if needed) and use fine point tweezers to grip the sticker and remove it.

Step 3

Use the plastic opening tools or insert a spudger to begin unclipping the system.
Pry the screen off once all the clips have been unclipped.
The screen may shatter if not already shattered (beware of flying glass).

Use the plastic opening tools or insert a spudger to begin unclipping the system.

Pry the screen off once all the clips have been unclipped.

The screen may shatter if not already shattered (beware of flying glass).

Step 4

This screen will broke. there are double tape underneath the frame, that is not listed in here.

This screen will broke. there are double tape underneath the frame, that is not listed in here.

Step 5

Remove the connecting cable of the screen and battery. Use a spudger to reveal the adhesive strip and carefully peel it off.
Insert a spudger to the other end and release the ZIF connectors. Detach the cable.
While a metal spudger is pictured, use a black nylon spudger instead because it is ESD safe.

Remove the connecting cable of the screen and battery. Use a spudger to reveal the adhesive strip and carefully peel it off.

Insert a spudger to the other end and release the ZIF connectors. Detach the cable.

While a metal spudger is pictured, use a black nylon spudger instead because it is ESD safe.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 4 other contributors

                    Talha Bin Amir

Member since: 10/23/2017

653 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S10-G6, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S10-G6, Thompson Fall 2017 



                    USFT-THOMPSON-F17S10G6                     


                                            4 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team