Difficulty

Easy

Steps

8

Time Required

                          5 - 10 minutes

Sections

3

  • Bottom Case
  • 2 steps
  • Battery
  • 5 steps
  • Speakers
  • 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Spectre 13-4002dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Case
  • Using the Torx T5 screwdriver, remove the eight 8 mm screws on the bottom case of the laptop.

Using the Torx T5 screwdriver, remove the eight 8 mm screws on the bottom case of the laptop.

1024

Step 2

  • Pry up one corner of the bottom case with a spudger.
  • Work the spudger around the edges, making your way towards the bottom of the laptop.
  • Remove the bottom case.

Pry up one corner of the bottom case with a spudger.

Work the spudger around the edges, making your way towards the bottom of the laptop.

Remove the bottom case.

Step 3

              Battery
  • Orient the laptop the same way as the pictures. The battery is bordered in a red outline.
  • Remove the six 4 mm screws using a Phillips #000 screwdriver.

Orient the laptop the same way as the pictures. The battery is bordered in a red outline.

Remove the six 4 mm screws using a Phillips #000 screwdriver.

Step 4

  • Do not disconnect the cable connector shown in the red box.
  • The speaker cable may be attached to the battery with black electrical tape. If so, remove the tape.
  • Move the cable clear of the battery.

Do not disconnect the cable connector shown in the red box.

The speaker cable may be attached to the battery with black electrical tape. If so, remove the tape.

Move the cable clear of the battery.

Step 5

  • Do not disconnect the cable connector located in the red box.
  • Use tweezers to remove the speaker cable from the groove attached to the battery.
  • Push the cable to the side so it does not get in the way of the battery removal.

Do not disconnect the cable connector located in the red box.

Use tweezers to remove the speaker cable from the groove attached to the battery.

Push the cable to the side so it does not get in the way of the battery removal.

Step 6

  • Disconnect the battery cable connector by sliding it out of the socket.
  • Move the battery out of the way if you need more room to disconnect the power cable.

Disconnect the battery cable connector by sliding it out of the socket.

Move the battery out of the way if you need more room to disconnect the power cable.

Step 7

  • Carefully remove the battery.

Carefully remove the battery.

Step 8

              Speakers
  • Remove four screws located on the bottom corners of speaker covers using the Phillips #00 screwdrivers.
  • Disconnect both 3-pin cables located on the edge of the computer.
  • Remove both speakers.

Remove four screws located on the bottom corners of speaker covers using the Phillips #00 screwdrivers.

Disconnect both 3-pin cables located on the edge of the computer.

Remove both speakers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Brian  Horn

Member since: 02/12/2020

73 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team S1-G5, Eggleston Spring 2020                        

                                                  Member of The Citadel Military College of South Carolina, Team S1-G5, Eggleston Spring 2020 



                    CMCSC-EGGLESTON-S20S1G5                     


                                            3 Members                     


                                            3 Guides authored