Difficulty
Easy
Steps
5
Time Required
15 minutes
Sections
2
- Bottom Case
- 2 steps
- Heat Sink
- 3 steps
Flags
0
BackHP Spectre 13-4002dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Case
- Using the Torx T5 screwdriver, remove the eight 8 mm screws on the bottom case of the laptop.
Using the Torx T5 screwdriver, remove the eight 8 mm screws on the bottom case of the laptop.
1024
Step 2
- Pry up one corner of the bottom case with a spudger.
- Work the spudger around the edges, making your way towards the bottom of the laptop.
- Remove the bottom case.
Pry up one corner of the bottom case with a spudger.
Work the spudger around the edges, making your way towards the bottom of the laptop.
Remove the bottom case.
Step 3
Heat Sink
- Remove the tape outlined in red.
- The tape can tear easily.
Remove the tape outlined in red.
The tape can tear easily.
Step 4
- Remove the four 3 mm screws using a Phillips #0 screwdriver.
Remove the four 3 mm screws using a Phillips #0 screwdriver.
Step 5
- Remove the heat sink from the laptop.
Remove the heat sink from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Cayce Stewart
Member since: 01/16/2019
725 Reputation
6 Guides authored
Badges:
6
+3 more badges
Team
University of Alabama, Team S1-G4, Bedsole Spring 2019
Member of University of Alabama, Team S1-G4, Bedsole Spring 2019
UA-BEDSOLE-S19S1G4
3 Members
6 Guides authored
