Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

3

  • Removal of the Back Case
  • 2 steps
  • Battery
  • 3 steps
  • Track Pad
  • 4 steps

Flags

0

  • BackHP Spectre 13-3010dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removal of the Back Case
  • Put on Anti Static Wrist Strap.
  • It is always a good idea to ground yourself when working with electronics to prevent static buildup. You wear this strap to protect you and your device from accidental electrostatic discharge (ESD) damage during repairs.]
  • Flip Computer Upside down.
  • Unscrew the eight 3.3mm black screws on the back casing with the T4 Torx Screwdriver.

Put on Anti Static Wrist Strap.

It is always a good idea to ground yourself when working with electronics to prevent static buildup. You wear this strap to protect you and your device from accidental electrostatic discharge (ESD) damage during repairs.]

Flip Computer Upside down.

Unscrew the eight 3.3mm black screws on the back casing with the T4 Torx Screwdriver.

1024

Step 2

  • Use the plastic opening tool to lift the back case off.
  • Use the plastic opening tools first; metal spudgers can damage your device.

Use the plastic opening tool to lift the back case off.

Use the plastic opening tools first; metal spudgers can damage your device.

Step 3

              Battery
  • Remove the six 2.0mm silver screws and the two 3.2 mm black screws using the PH00 Phillips Screw Head.

Remove the six 2.0mm silver screws and the two 3.2 mm black screws using the PH00 Phillips Screw Head.

Step 4

  • Gently unplug from CONO851 plug, using the plastic opening tool.

Gently unplug from CONO851 plug, using the plastic opening tool.

Step 5

  • Gently lift up the battery and remove using the plastic opening tools.

Gently lift up the battery and remove using the plastic opening tools.

Step 6

              Track Pad
  • Unscrew the five 2.3 mm screws using the PH000 screw head.

Unscrew the five 2.3 mm screws using the PH000 screw head.

Step 7

  • Lift up the latch using the nylon spudger.

Lift up the latch using the nylon spudger.

Step 8

  • Disconnect the ribbon.

Disconnect the ribbon.

Step 9

  • Lift out the track pad.

Lift out the track pad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Laurisa Titterud

Member since: 01/25/2016

1,236 Reputation

                                      6 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       University of Wisconsin Stout, Team 1-2, Schneider-Bateman Spring 2016                        

                                                  Member of University of Wisconsin Stout, Team 1-2, Schneider-Bateman Spring 2016 



                    UWSTOUT-SCHNEIDER-BATEMAN-S16S1G2                     


                                            3 Members                     


                                            6 Guides authored