Hp Slate 8 Pro Speakers Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes            

Sections

1

• Speakers
• 6 steps

Flags

2

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP Slate 8 Pro

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove back cover               

• Use plastic opening tool to pry back panel off.

Use plastic opening tool to pry back panel off.

1024

Step 2

              Detach IO Board from system               

• Remove the orange and yellow ribbon cables.
• detach the screws along the IO board

Remove the orange and yellow ribbon cables.

detach the screws along the IO board

Step 3

              Remove the IO board and the speakers               

• Remove the IO board and the speakers circuit. Note that they are held together.

Remove the IO board and the speakers circuit. Note that they are held together.

Step 4

              Detach the speakers from the IO board.               

• The tablet has two speakers. Each speaker is located to both sides of the IO board.
• Detach the speakers from the cables that connect the speakers and the IO board. You will find more details in step 5 and 6.

The tablet has two speakers. Each speaker is located to both sides of the IO board.

Detach the speakers from the cables that connect the speakers and the IO board. You will find more details in step 5 and 6.

Step 5

              Remove the wires of the speakers from the IO board.               

• To remove the cables that connect the speakers and the IO board, apply a subtle pressure to pull the cable out.

To remove the cables that connect the speakers and the IO board, apply a subtle pressure to pull the cable out.

Step 6

              Replace your speakers with the new parts               

• Once you detach the speakers from the IO board, you should have three pieces as shown.
• You are ready to replace the speakers.

Once you detach the speakers from the IO board, you should have three pieces as shown.

You are ready to replace the speakers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Jose Revelo                     

Member since: 09/23/2014

305 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       USF Tampa, Team 9-4, Blackwell Fall 2014                        

                                                  Member of USF Tampa, Team 9-4, Blackwell Fall 2014 



                    USFT-BLACKWELL-F14S9G4                     


                                            4 Members                     


                                            10 Guides authored