Difficulty
Moderate
Steps
3
Time Required
20 minutes
Sections
1
- Rear Facing Camera
- 3 steps
Flags
0
BackHP Slate 8 Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Facing Camera
- Secure the suction cup to the center of the screen.
- Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.
Secure the suction cup to the center of the screen.
Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.
1024
Step 2
- Use the Spudger to disconnect the ribbon cable to the rear facing camera.
Use the Spudger to disconnect the ribbon cable to the rear facing camera.
Step 3
- Use the tweezers to pry the camera assembly away from the motherboard.
Use the tweezers to pry the camera assembly away from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Andrew Hall
Member since: 05/23/2016
322 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
IUPUI, Team 1-4, Renguette SU 2016
Member of IUPUI, Team 1-4, Renguette SU 2016
IUPUI-RENGUETTE-SU16S1G4
4 Members
6 Guides authored
