Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes            

Sections

1

  • Microphone
  • 5 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackHP Slate 8 Pro

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the back cover               
  • Before opening your device, turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
  • Unplug your tablet from any power supply
  • Remove all external devices.
  • Remove back cover with plastic tools to avoid scratching the screen.

Before opening your device, turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

Unplug your tablet from any power supply

Remove all external devices.

Remove back cover with plastic tools to avoid scratching the screen.

1024

Step 2

              Remove screws               
  • Remove all screws from the sides of the battery

Remove all screws from the sides of the battery

Step 3

              Disconnect the battery cable               
  • Disconnect the battery cable from the system board.
  • Use a little bit of pressure to remove the cable.

Disconnect the battery cable from the system board.

Use a little bit of pressure to remove the cable.

Step 4

              Remove ZIF connector               
  • Release the ZIF connector to which the microphone cable is attached

Release the ZIF connector to which the microphone cable is attached

Step 5

              Remove the  microphone               
  • Remove microphone from panel using tweezers
  • Add your new microphone

Remove microphone from panel using tweezers

Add your new microphone

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Claudia                     

Member since: 08/31/2014

246 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 9-4, Blackwell Fall 2014                        

                                                  Member of USF Tampa, Team 9-4, Blackwell Fall 2014 



                    USFT-BLACKWELL-F14S9G4                     


                                            4 Members                     


                                            10 Guides authored