Difficulty
Moderate
Steps
3
Time Required
10 - 15 minutes
Sections
1
- Front Facing Camera
- 3 steps
Flags
0
BackHP Slate 8 Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Facing Camera
- Secure the suction cup to the center of the screen.
- Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.
Secure the suction cup to the center of the screen.
Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.
1024
Step 2
- Use the Spudger to disconnect the ribbon cable to the upper camera by prying the connector away from the board.
Use the Spudger to disconnect the ribbon cable to the upper camera by prying the connector away from the board.
Step 3
- Use ESD safe tweezers to pry the camera away from the motherboard starting at the side opposite the ribbon cable.
Use ESD safe tweezers to pry the camera away from the motherboard starting at the side opposite the ribbon cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Andrew Hall
Member since: 05/23/2016
322 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
IUPUI, Team 1-4, Renguette SU 2016
Member of IUPUI, Team 1-4, Renguette SU 2016
IUPUI-RENGUETTE-SU16S1G4
4 Members
6 Guides authored
