Difficulty

Easy

Steps

3

Time Required

                          15 minutes            

Sections

2

  • Back Cover
  • 1 step
  • Top Speaker
  • 2 steps

Flags

0

  • BackHP Slate 7 Extreme 4400US

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover               
  • Use the plastic opening tool to separate the back cover from the tablet. Carefully use the tool to pry open the sides, going around the entire tablet to lift the sides up.
  • Once all sides have been pried up, pull the cover off and place it to the side.

Use the plastic opening tool to separate the back cover from the tablet. Carefully use the tool to pry open the sides, going around the entire tablet to lift the sides up.

Once all sides have been pried up, pull the cover off and place it to the side.

1024

Step 2

              Top Speaker               
  • Use the PH #000 phillips screw bit to remove one 5.0 mm screw.

Use the PH #000 phillips screw bit to remove one 5.0 mm screw.

Step 3

  • Gently pull the entire black housing away from device.
  • Locate where the speakers’ wires are connected to the motherboard.
  • Using wire cutters, sever the wires connecting the speaker to the motherboard. Strip the wires with a wire stripper and fashion the new wires to the old ones connected to the motherboard to reconnect.
  • You may use a soldering tool to disconnect the wires from the motherboard and to reconnect the new wires back to the motherboard.

Gently pull the entire black housing away from device.

Locate where the speakers’ wires are connected to the motherboard.

Using wire cutters, sever the wires connecting the speaker to the motherboard. Strip the wires with a wire stripper and fashion the new wires to the old ones connected to the motherboard to reconnect.

You may use a soldering tool to disconnect the wires from the motherboard and to reconnect the new wires back to the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Brandon Ko                     

Member since: 09/15/2016

698 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 11-4, Blackwell Fall 2016                        

                                                  Member of USF Tampa, Team 11-4, Blackwell Fall 2016 



                    USFT-BLACKWELL-F16S11G4                     


                                            4 Members                     


                                            16 Guides authored