Difficulty
Moderate
Steps
2
Time Required
10 minutes
Sections
- Back Cover
- 1 step
- Rear-Facing Camera
- 1 step
Flags
0
BackHP Slate 7 Extreme 4400US
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Use the plastic opening tool to separate the back cover from the tablet. Carefully use the tool to pry open the sides, going around the entire tablet to lift the sides up.
- Once all sides have been pried up, pull the cover off and place it to the side.
Use the plastic opening tool to separate the back cover from the tablet. Carefully use the tool to pry open the sides, going around the entire tablet to lift the sides up.
Once all sides have been pried up, pull the cover off and place it to the side.
1024
Step 2
Rear-Facing Camera
- Pull back the tape holding the the camera’s connector strip to the device.
- Use the nylon spudger to flip up the black retaining flap of the zero insertion force (ZIF) connector holding the strip in place.
- Gently pull the camera’s connecting strip out from the port.
Pull back the tape holding the the camera’s connector strip to the device.
Use the nylon spudger to flip up the black retaining flap of the zero insertion force (ZIF) connector holding the strip in place.
Gently pull the camera’s connecting strip out from the port.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Riley Wells
Member since: 09/15/2016
111 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 11-4, Blackwell Fall 2016
Member of USF Tampa, Team 11-4, Blackwell Fall 2016
USFT-BLACKWELL-F16S11G4
4 Members
16 Guides authored