Difficulty

Easy

Steps

6

Time Required

                          8 - 10 minutes

Sections

2

  • Back Removal
  • 4 steps
  • Wi-Fi Adapter
  • 2 steps

Flags

0

  • BackHP ProOne 600 G1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Removal
  • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

1024

Step 2

  • Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

Step 3

  • Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

Step 4

  • Remove the backplate by pulling it back towards you.
  • Small plastic tabs hold in the backplate, pull these up to remove it.

Remove the backplate by pulling it back towards you.

Small plastic tabs hold in the backplate, pull these up to remove it.

Step 5

              Wi-Fi Adapter
  • Locate the Wi-Fi adapter at the top right corner of where the stand once was.
  • Unscrew the screws using the Philips #1 Screwdriver.

Locate the Wi-Fi adapter at the top right corner of where the stand once was.

Unscrew the screws using the Philips #1 Screwdriver.

Step 6

  • Remove wire tabs from the left side of the Wi-Fi adapter.
  • Remove the adapter

Remove wire tabs from the left side of the Wi-Fi adapter.

Remove the adapter

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Janelle Layman

Member since: 10/01/2015

243 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 1-20, Maness Fall 2015                        

                                                  Member of Cal Poly, Team 1-20, Maness Fall 2015 



                    CPSU-MANESS-F15S1G20                     


                                            4 Members                     


                                            12 Guides authored