Hp Proone 600 G1 Fan Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

2

• Back Removal
• 4 steps
• Fan
• 2 steps

Flags

0

• BackHP ProOne 600 G1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Removal               

• Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

1024

Step 2

• Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

Step 3

• Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

Step 4

• Remove the backplate by pulling it back towards you.
• Small plastic tabs hold in the backplate, pull these up to remove it.

Remove the backplate by pulling it back towards you.

Small plastic tabs hold in the backplate, pull these up to remove it.

Step 5

              Fan               

• Remove both 3/8" screws using the T15 Torx Screwdriver from the metal plate, and slide the plate to the left.

Remove both 3/8" screws using the T15 Torx Screwdriver from the metal plate, and slide the plate to the left.

Step 6

• Unscrew three surrounding 1/4" screws, with the T15 Torx Screwdriver. Pull out the fan and attached wires.

Unscrew three surrounding 1/4" screws, with the T15 Torx Screwdriver. Pull out the fan and attached wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Victor Chacon                     

Member since: 10/01/2015

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 1-20, Maness Fall 2015                        

                                                  Member of Cal Poly, Team 1-20, Maness Fall 2015 



                    CPSU-MANESS-F15S1G20                     


                                            4 Members                     


                                            12 Guides authored