Hp Probook X360 11 G5 Ee Charging Port Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          15 - 25 minutes            

Sections

3

• Keyboard Assembly
• 5 steps
• Battery
• 2 steps
• Charging Port
• 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP ProBook x360 11 G5 EE

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard Assembly               

• Remove the 4.1 mm screws with a T5 Torx screwdriver.
• Remove the 4.1 mm screws using a JIS #0 screwdriver.

Remove the 4.1 mm screws with a T5 Torx screwdriver.

Remove the 4.1 mm screws using a JIS #0 screwdriver.

1024

Step 2

• Use an opening pick to pry the corners of the keyboard deck.

Use an opening pick to pry the corners of the keyboard deck.

Step 3

• Use an opening pick or opening tool to pry around the sides of the keyboard assembly.

Use an opening pick or opening tool to pry around the sides of the keyboard assembly.

Step 4

• Lift the keyboard assembly to expose two ribbon cables.
• Lift the two plastic tabs that hold the cables in place on the motherboard
• Slide the ribbon cables out of each connector.

Lift the keyboard assembly to expose two ribbon cables.

Lift the two plastic tabs that hold the cables in place on the motherboard

Slide the ribbon cables out of each connector.

Step 5

• Remove the keyboard assembly from the rest of the computer.

Remove the keyboard assembly from the rest of the computer.

Step 6

              Battery               

• Remove the four 3 mm screws from the battery with the JIS #0 screwdriver.

Remove the four 3 mm screws from the battery with the JIS #0 screwdriver.

Step 7

• Pry the battery up from the laptop using an opening pick.
• Lift the battery out of its place.

Pry the battery up from the laptop using an opening pick.

Lift the battery out of its place.

Step 8

              Charging Port               

• Remove the single 3 mm screw from the charging port using a T5 Torx screwdriver.

Remove the single 3 mm screw from the charging port using a T5 Torx screwdriver.

Step 9

• Disconnect the charging port wire from the motherboard.
• Remove the charging port from your device.

Disconnect the charging port wire from the motherboard.

Remove the charging port from your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Michelle Pina                     

Member since: 10/26/2021

397 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Gateway, Team 1-4, Pee Fall 2021                        

                                                  Member of Gateway, Team 1-4, Pee Fall 2021 



                    GCC-PEE-F21S1G4                     


                                            6 Members                     


                                            5 Guides authored                     

Riccardo Insolera - Jul 9, 2022

Reply

Hi!! I have the same model of notebook with 64 giga emmc. Is it possible installing an ssd or an hdd?