Difficulty
Easy
Steps
3
Time Required
10 - 25 minutes
Sections
1
- Keyboard
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHP ProBook 645 G1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove 2 screws
- Remove the two screws at the two indicated locations with the phillips head screw driver.
Remove the two screws at the two indicated locations with the phillips head screw driver.
1024
Step 2
Flip unit over and open lid.
- Take a spudger tool and pry the keyboard down toward the mouse pad and up toward you. After you raise the keyboard there are tabs at the bottom. Pull the keyboard away from you, and it will dislodge.
Take a spudger tool and pry the keyboard down toward the mouse pad and up toward you. After you raise the keyboard there are tabs at the bottom. Pull the keyboard away from you, and it will dislodge.
Step 3
Ribbon Removal
- Remove ribbon by flipping the black tab up and gently pulling on the ribbon.
- This ribbon has no tab, gently pull on until it comes loose. To reinsert. Line it up carefully as not to damage the ribbon, and push gently.
Remove ribbon by flipping the black tab up and gently pulling on the ribbon.
This ribbon has no tab, gently pull on until it comes loose. To reinsert. Line it up carefully as not to damage the ribbon, and push gently.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Doug
Member since: 04/02/2015
191 Reputation
1 Guide authored
Badges:
5
+2 more badges